Economy Caulk Gun
The Flexible/Lightweight Caulking gun from Malco has a compact design that easily stores in a toolbox. This product features a handy puncture wire, ladder size hang hook, and a 1/10 gallon capacity.
Heavy Duty Caulk Gun
Smooth action with large, comfortable power grip. Double-gripping plate and steel trigger for greater durability. Trigger adjustment screw compensates for normal wear to ensure full dispensing stroke and extend tool life. Rotating barrel for maneuverability and easy caulk placement.
Dripless Caulk Gun
The Fisher Hand Tools™ caulk gun features a 360° rotary steel riveted carriage, a 12:1 thrust ratio, built in puncture tool and dripless design. Quickly handle caulking jobs with the easy-to-use squeeze grip.
Drip Edge Folding Tool
Big 24-inch (61 cm) Drip Edge Folding Tools make quick bends along the drip edge of flat-pan standing seam metal roofing panels. Two rib-reinforced steel plates are permanently welded together to create two folding seams for making 1-inch (25.4 mm) and 1-1/2-inch (38.1 mm) deep bends in maximum 22-gauge (0.76 mm) steel. A two-post-design, fiberglass reinforced nylon handle offers durable, lightweight strength and high leverage for working overhead or on a bench.
Turbo Shear HD
The Malco TurboShear Heavy Duty (TSHD) is a powerful sheet metal cutting tool that can be quickly attached to a corded or cordless drill. This electric shear attachment has the capability to make fast straight, curved, or square cuts in most common sheet metals. The shear’s wide-opening jaws can operate at high or low speeds for the control you need, when you need it.
Steel Hand Seamer & Steel Offset Seamer • 3” & 6”
Hand Seamers, with forged steel jaws, are the premier choice for bending, folding, flattening and straightening sheet metal edges or safely gripping and moving sheet metal around the job site. These seamers are available in 3 inch (76.2 mm) and 6 inch (152.4 mm) jaw widths as well as an offset 3 inch (76.2 mm) size for overhead work. The drop-forged, high-impact jaws feature depth markings graduated in 1/4 inch (6.4 mm) increments and are complimented by a powerful compound leverage design. Easily bend flanges or completely flatten seams from 1/4 to 1-1/4 inch (6.4-31.8 mm) deep in 24 gauge (0.71 mm) galvanized or (0.61 mm) mild steel.
Aluminum Hand Seamer • 5” & 9”
Hand Seamers, with die cast zinc jaws, are gentle on painted or coated metal surfaces. These seamers are ideal for making clean and accurate bends and seams in aluminum roof flashing, coil stock or fascia. The Jaws feature depth graduations in 1/4 inch (6.35 mm) increments to a maximum 2-inch (50.8 mm) bending depth. The jaws of these large die cast seamers are bowed so that they will hold firmly and evenly across the entire jaw width even when engaged on very light material. The large surface coverage this tool offers, also has an appeal for limited flattening / straightening tasks in light gauge painted steel including edges of auto body panels. Durable construction offers long, dependable service life under normal use. These tools also feature rust resistant nickel plating.
Hand Notcher
Specialized for folding and fabricating metal, including metal ductwork. The N2R Hand Notcher makes a full 1-inch (25.4 mm) deep “V” shaped corner notch in 24-gauge (0.71 mm) galvanized or (0.61 mm) mild steel. Long-wearing, precision-ground, steel upper jaw and hardened steel stamped components feature rust-resistant nickel plate and black oxide finishes.
Ceiling Grid Punch
Malco’s Ceiling Grid Punch makes clean 1/8 inch (3.2 mm) holes in up to three layers of 25 gauge (0.53 mm) ceiling grid. The tool’s slim, but strong, “C” shaped steel frame ensures lightweight, one hand operation and allows easy access into tight corners. It is ideal for punching through main tees and perimeter wall angle that is to be secured with blind rivets. A generous throat opening allows full operation from the edge of both standard 1 inch and 1/2 inch (25.4 and 12.7 mm) grid profiles. This durable punch features hardened all-steel construction with rust resistant nickel plate and black oxide finishes. The long-life tool steel punch is also easily replaced on the job.
Straight Cut Snips
Max2000 Aviation Snips are made in the USA and available in left, right, and combination cutting options. These snips feature Euro-styled ergonomic handles. Textured, solid-colored, molded thermoplastic grips and finger stops compliment a narrow handle opening to fit large or small hands. An ambidextrous, thumb-operated handle latch and replaceable compression spring complete this user-friendly design.
Left & Right Cut Snips
Max2000 Offset Aviation Snip’s are the premiere option for your vinyl plastic and metal cutting needs. Available in left and right cutting models. These offset snips feature Euro-styled ergonomic handles for greater comfort. Textured, solid-colored, molded thermoplastic grips and finger stops compliment a narrower handle opening to fit large or small hands. An ambidextrous, thumb-operated handle latch and replaceable compression spring complete this user-friendly design.
Long Nose Left & Right Cut Snips
Aviation Snips are featured with dropped fordged chrome blades and serrated edges. Made for easy and precise on-site cutting of metal panels. With the strength to cut 18 gauge stainless, these aviation snips are a must have for any metal panel job.
Offset Left & Right Cut Snips
Aviation Snips are featured with dropped fordged chrome blades and serrated edges. Made for easy and precise on-site cutting of metal panels. With the strength to cut 18 gauge stainless, these aviation snips are a must have for any metal panel job.
Rivet Gun
Lightweight, compact size and slim nose projection allows this riveter to go wherever the work is. Four rivet nosepieces: 3/32”, 1/8”, 5/32”, and 3/16″ store in handle. Ideally suited for blind riveting applications in aluminum windows, gutter and downspout. Not for use with 5/32″ or 3/16″ steel rivets (steel rivets larger than 3.2 mm). Spring return handles and comfortable contour grip make operation fast and easy. Just open handles and insert rivet into tool until flange touches nosepiece. Squeeze handles slightly to allow jaws to grip rivet mandrel. Insert rivet into pre-drilled work to be fastened and squeeze handles until mandrel snaps. Release grip on handles and mandrel will drop out front end of tool when tilted.
Hole Cutter
Malco’s sheet metal hole cutter quickly installs into the chuck of any corded or cordless drill as small as 1/4″ (6.35 mm). The Distinctive Gold Bits, Bearings, and Pivot Pin signify the longest lasting, fastest cutting, and easiest adjusting solution for cutting holes in sheet metal. A Lightweight aluminum frame makes these accessories extremely portable for a variety of hole cutting applications in sheet metal, which includes 20-gauge (1.02 mm) galvanized steel. A compact model HC1 Hole Cutter is adjustable for making 2 to 12″ (51 to 305 mm) diameter holes. The larger HC2 model cuts 2 to 20″ (51 to 508 mm) holes. A combination English/Metric diameter gauge is included on the adjustable pivot slide for both models and both models use the same mill-type Cutter Bit and replacement parts.
